Variable width "sidewalk"
I've been pushing for a variable width sidewalk. There are a couple scenarios where this would be handy. The latest is, I have a long and windy driveway with ditches on either side. If I outline the driveway as an area, I have to choose either straight
Delete no-go zones individually
Currently, the app appears to only allow deletion of *all* no-go zones on a plan. It would be nice to be able to delete them selectively. Thinking ahead, this seems as if it will be a more important issue with the mower, since there's a spot on my yard
Who else is super excited for this week's snow?
I think I am as excited as my kids. Remapped my driveway and can't wait to see if it runs better!
Auger speed on "pathway"
My "pathway" goes over my yard and I don't really want Yarbo running the auger on the grass. Is the "quiet" speed (misspelled as "quite" in the app, btw) actually "off?" If not, I'd love an option to turn the auger off entirely during transit. It also
API Access or Integration
Hi there! I am a developer for home automation integrations, specifically for both Home Assistant and Control4. I would love to be able to write integrations for both of these systems for the Yarbo hardware. Are there any plans to allow third party access
Modify Map
I am writing to share a suggestion regarding the navigation system of the Yarbo snow robot, specifically under the 'Modify Map' option. At present, the system offers two route modes: 'Single' and 'Circular'. While these options are beneficial, they may
4G Connection
Does anyone know how YARBO goes about using a 4G connection? is there a modem and SIM somewhere in it? does it use a specific carrier ? does anybody know any details?
Physical controller instructions
The physical controller instructions indicate to press RB then move joystick, please update to press and hold RB then move joystick The rover speed adjustment instructions say to press and hold RB then move joystick down to adjust the speed. This just
Does charging shut-off at 100%?
I've found that when my Yarbo returns to charge after hitting the recharge button that it still shows as charging after it hits 100%. Is this normal? I would assume after it hits 100% that it would stop charging. I just want to be sure that it isn't damaging
4g will not turn on
I try to turn on 4g in app and using yarb tool submitted 2 tickets no remedy. No response to ticket since 1/17 no response to issue in group and post pending for days then disappears looking for any suggestions
Not acquiring a GPS signal
Not getting gps signal I know it’s cloudy outside but I think I should get something because winter time usually cloudy… Also will it work as good without gps
App 3.3.2 and Firmware 2.7.1 Release Note
Dear Yarbo Family, Exciting news! Our latest firmware and software update is now live, featuring a host of new features and improvements! This update is tailored to enhance your experience with Yarbo, ensuring an even more enjoyable and efficient use.
Controller vibrates
Just set up my unit, had the remote control working ok, then download app and tried using remote to try outside but now the remote just vibrates when trying to drive, only thing I am able to do is move module up and down and move shoot. Side to side
Ideas after first snowstorm
Just got my first snowfall after setting up yarbo. Plan was pretty simple- mostly straight 110 foot 2 car wide driveway with two cars parked back to back on one side. Originally hoped to run yarbo once in the morning, move cars to cleared side, run yarbo
Can we get an explanation of how communication works?
I took some assumptions on how this was supposed to work. I thought I was hooking this base up with WiFi and the LORA/RTK setup so that Yarbo would use the LORA to communicate back to the base, and the base to the WiFi and that would keep us in constant
Home Assistant Integration
Would love to see Home Assistant integration so we could automate schedules/trigger ondemand tasks and get real time updates about Yarbo in general. API/webhook support would need to be documented for community development to take place.
Yarbo Leaving Defined Boundary
While executing Work Plan, Yarbo leaves the designated (mapped) boundary and continues running the auger into mulched beds. Received Error (502) and Error (0) on the app while attempting to manually reposition inside the boundary and begin again. Repeated
Yarbo not moving to "Ready to Work" mode after firmware update
I could move yarbo with controller but after firmware update. rover lights keep switcthing between red/blue/green and it never goes to "Ready to Work" mode. Controller connects to rover but none of the buttons work I assume this is because rover is not
Snow throw distance setting
It seems the snow throw distance setting is backwards. When I set it to 0-0 the chute deflector is all the way open. In my mind that is the maximum distance. If I set it to 42-42 the chute deflector is turned all the way down. In my mind this is the shortest
Map editing
Is there a way to edit the map that is created without going back and driving back around the border? In mapping software
Missing charging station
I tested the Yarbo 2x while I was at home. About 1/2 to 1” of snow on drive. Both times he returned to charging pad to recharge. I left for a few weeks to Florida- we got a heavier snowfall last night, about 3” to 5”. I programmed the schedule to have
manual controller phone holder
Has any found a phone holder for the Yarbo manual controller?
Multiple work setups.
We park our cars on the driveway so I would like to create a lower driveway and laneway setup that I can run. Along with this I would also like to create a second run to do the upper driveway and walkway once I move the cars. Is this possible?
Channel selection
Since I see a lot of users having trouble staying connected. What would be the possibility of performing a scan for the strongest channel then automatically selecting it or showing top channels and letting user select.
Snow & Ice Clogging Chute
Ran Yarbo for the 1st time with snow on a 1" melting (32-degree) event. Snow consistently clogged and froze in place within the discharge chute. I removed the deflector shield from the chute & protective fence. No improvement, rendering the unit useless
IMMEDIATE NEED! Recharge Auger Height
We need to be able to set the auger height on the return to recharge cycle. I have placed my base in the yard to get through the winter and this thing is tearing up the sod. In the driveway I had to significantly raise the auger height to get it to clean
Wired charging doesn't "click"
Charging at the docking station failed, so I'm useful the wire charger for the first time. The plug has an obvious "Push" label on the connector lock, but this does not seem to engage when I post the plug into the socket. There doesn't seem to be any
Adding Yarbo 2nd user
When trying to add a 2nd user in app( my wife) when she goes to scan or type in SN, we get error message "list index out of range". Any ideas how to fix this...?
Discharge chute does not track per plan after Yarbo resumes clearing after a recharge
If the unit needs to recharge before finishing clearing an area, the chute direction settings in the plan are lost when the unit resumes clearing after the charge cycle ends. The snow is discharged straight ahead and not to the sides that the plan calls
Set up
Is there an option to have a professional yarbo member come to my house and set it up? Willing to pay and would wait for the mower attachment to arrive.
Left Motor Track Works in Reverse, But Not Forward
Anyone else have this issue (I opened a ticket too). The left track will not move in a forward direction, but does work fine when going backward? So, I cannot get Yarbo to go in a straight forward line as the right track only is functioning and it is
Offline Mapping - Editing an Existing Map
It would be helpful to have the ability to adjust an existing map while the rover is charging (and indoors). All the map editing features would be needed (e.g. no-go zones, snow throwing zones, etc) The offline mode would sync with the rover the first
Idea: Allow an existing area to be re-mapped
After defining and using an Area, sometimes I would like to make some changes. Currently (app 3.3.2, firmware 2.7.2) I have to delete the Area and define a new Area. Deleting the Area also deletes the Area Settings and corresponding Work Plan, so after
Options for “dry run” testing of plan after setup
Hi — I would like some options to do a test run of a plan: — option to turn the auger off when doing a test run — option to have the rover just follow the perimeter of the plan area These would be useful after setting up a plan in dry (no snow) conditions
Emergency Stop & Can't Get Firmware
Finally able to get this thing out of the boxes as the snow is piling up here. First issue I have is this will not shut up about Emergency Stop. It announces it every 10 seconds.. the E-Stop but is NOT depressed and I have tried switching it a few times
Rover Non Responsive w/ Controller
I have recently completed the setup of the Yarbo where I was able to use the Xbox looking controller to control the Yarbo for a few minutes. After stopping the Yarbo, I have since been able to control the Yarbo from that remote after following the same
Yarbo Mapping, Add Area, Work Plan
I've researched/read/watched all of the available videos on Map Creation, however, I cannot determine if the following features are available and if so, how to create/enable them: How to create multiple maps (i.e. Driveway, Entry Walk, Patio independently)
Network connectivity and strength
It would be nice in the app if it showed if it was connected to WiFi , which WiFi network and the strength. I also would like to see the same for 4g. Is it connected to 4g and how strong is the signal. This would help know if it’s flipping from WiFi to
Yarbo WiFi settings
I have UniFi as my outdoor WiFi. It’s a mesh system. My yarbo base has connected just fine to my UniFi system. I can’t however seem to get the rover to connect and stay connected. What are the optimal WiFi settings to keep Yarbo connected? I have tried
Améliorations diverses
Suite à une grosse tempête de neige, j'ai décelé différent problèmes et je souhaiterais les partager et avancer des solutions 1: Problème de traction dans la neige: Yarbo semble avoir de la difficulté à se mouvoir si le sol sou lui n'est pas solide et
Next Page