Start Mapping
How to Draw Snow-throwing Directions to Maximize Efficiency?
In the mapping process, snow-throwing directions should be set for your pathway and work areas (including sidewalks), which guides the chute to blow snow in the direction(s) of your choice. While the setting of these directions largely depends on the ...
What is the 'route mode' and how to adjust it?
The 'Route' refers to the automated working path generated by Yarbo within your workspace. When implementing a plan, Yarbo will follow the route precisely for snow-blowing operations. We offer two route modes, Parallel and Circular, designed to ...
How to add more areas to an existing map?
There are two ways to add more areas to an existing map. Please follow these steps for each method: Add more areas option will be shown after your working area has been drawn, the throwing direction has been selected, route mode has been set. Method ...
How to Create the No-go zone?
What is No-go zone? The ”No-go zone" refers to areas within the working zone where you don't want Yarbo to enter. You need to draw it as a closed-off area. You can designate areas such as your car in the driveway, flower beds in the yard, and other ...
How to Set Snow-throwing Directions?
1. While conducting the cleaning process, Yarbo is designed to expel snow, requiring the configuration of snow-throwing directions within its cleaning area. 2. Once the snow-throwing directions are set, Yarbo will automatically direct the snow in the ...
How to Draw a Working Area?
The working area refers to the specific zones covered in snow where you intend for Yarbo to perform snow cleaning operations. The working area is a completely enclosed zone, and it cannot exist independently; it must be connected to the pathway you ...
How to Draw a Pathway?
What is Pathway? A pathway is created to guide Yarbo to the specific area where work needs to be done. The Pathway is a line connecting the Docking Station to a Working Area and two separate Areas. How to Draw a Pathway? 1. Accessing the Mapping ...
Where to Find Mapping Feature?
Start Mapping from the onboarding tutorial After finishing the onboarding tutorial, proceed to the mapping preparations page and click on 'Next'. Subsequently, click the 'Finished' button to initiate the mapping process. Start Mapping from the Device ...