Mapping
How to Draw Snow-throwing Directions to Maximize Efficiency?
In the mapping process, snow-throwing directions should be set for your pathway and work areas (including sidewalks), which guides the chute to blow snow in the direction(s) of your choice. While the setting of these directions largely depends on the ...
How to add more areas to an existing map?
There are two ways to add more areas to an existing map. Please follow these steps for each method: Add more areas option will be shown after your working area has been drawn, the throwing direction has been selected, route mode has been set. Method ...
How to Create the No-go zone?
What is No-go zone? The ”No-go zone" refers to areas within the working zone where you don't want Yarbo to enter. You need to draw it as a closed-off area. You can designate areas such as your car in the driveway, flower beds in the yard, and other ...
How to Draw a Pathway?
What is Pathway? A pathway is created to guide Yarbo to the specific area where work needs to be done. The Pathway is a line connecting the Docking Station to a Working Area and two separate Areas. How to Draw a Pathway? 1. Accessing the Mapping ...
How to modify 'No-go Zone'?
1. Add a No-go zone: Method 1: Add a no-go zone from the mapping process After you select the route mode, click the 'Check Mark'. Step 1: Select 'Create no-go zone' from the three other options Step 2: Click 'Start' Draw your designated no-go zone ...
How to Draw a Working Area?
The working area refers to the specific zones covered in snow where you intend for Yarbo to perform snow cleaning operations. The working area is a completely enclosed zone, and it cannot exist independently; it must be connected to the pathway you ...
Instructions for setting snow-throwing directions
1. While conducting the cleaning process, Yarbo is designed to expel snow, requiring the configuration of snow-throwing directions within its cleaning area. 2. Once the snow-throwing directions are set, Yarbo will automatically direct the snow in the ...
The steps for adding a background to the map
Before proceeding, remember to search for a satellite map of your desired area using a platform like Google Earth. Take a screenshot of the area you wish to use as the background for your map. After preparing your satellite image screenshot, follow ...
Adding and modifying No-go Zones
How to redraw your map?
You can redraw the entire map. The process of redrawing is the same as the mapping process.
How to redraw Snow Throw Directions for the work area ?
Step 1: Navigate to the device page and click on the map icon. Then, locate the "Modify" button on the My Map page. Step 2: On the area editing page, look for the small arrow button to access the editing options. Step 3: Within the area editing page, ...
What is the 'route mode' and how to adjust it?
The 'Route' refers to the automated working path generated by Yarbo within your workspace. When implementing a plan, Yarbo will follow the route precisely for snow-blowing operations. We offer two route modes, Parallel and Circular, designed to ...
Where to Find Mapping Feature?
Upon completing the tutorials, please click on the "Start Mapping" button to enter the Mapping section directly. If you accidentally exist the tutorials, locate the Plus Sign icon within the APP's interface. Click on the plus sign to return to the ...