The RTK base is minimally affected by temperature fluctuations. However, it is crucial to avoid exposing it to water as it is not waterproof. It can only be used in the temperature range spans from -30°C to 60°C (-22°F to 140°F). Therefore, whether ...
Make sure the RTK Antenna structure is securely fastened. Any movement in the structure of the antenna will directly affect the accuracy of Yarbo’s positioning.
DO NOT change the location of the RTK or the Docking Station. Any change in location requires a full data reset, reinstalling the docking station and re-mapping from scratch to guarantee precise positioning.
Carefully secure the protective cover over the connection cable. This will help prevent any potential damage from snow or rain to the cable, the inner components and prevent un-authorized removal of the front module.
Press and hold "SELECT + B" to turn off, or it will automatically shut down if no operations are conducted within 5 minutes. Please be mindful when moving the controller between outdoor and indoor environments. The changes in temperature can cause ...
Please DO NOT lift the bumper as it houses sensitive sensors. Its primary function is to act as an emergency button upon encountering an obstacle such as a person, wall, or vehicle, ensuring Yarbo shuts down automatically within 0.015 seconds. This ...
1. Make sure to securely fasten the antennas on both the Yarbo Main Body and the external RTK pole. 2. Make sure to tighten the antennas just enough, but be careful not to overdo it as it could cause damage.