Maintenance Tips
How to properly reinstall the blades after cleaning or maintenance?
Properly reinstalling the blades on your lawn mower after cleaning or maintenance is crucial for safe and efficient operation. Follow these steps and refer to the provided video link for detailed guidance. Safety Reminders Always use the specified ...
How to prevent and remove rust or corrosion from the mower's exterior and components？
How to prevent rust or corrosion from the mower's exterior and components? It is noticeable that the mower module needs maintenance to prevent rust and corrosion on its exterior and components when it remains unused for more than three months. Detach ...
How often do I need to replace the cutting blades?
Maintaining the cutting blades of your lawn mower is essential for achieving a well-manicured lawn. Whether you're dealing with regular lawn care or tackling thicker grass, keeping your blades sharp and in good condition is key. Here's a ...
How to safely handle and dispose of old or damaged blades?
The cutting blades can be replaced when they are damaged or worn out. We recommend you change the blades every six months. Make sure the blades are fixed securely and flexibly. Handing and disposing of old or damaged blades includes 4 steps: Detach ...
How to clean and maintain the mower's rain sensor for accurate detection?
The rain sensor is located at the top front of the mower module, covered by a small silicone with grooves. You can use a soft brush to clean the grooves to ensure no dust or other obstruction filled between two small yellow conductive probes. During ...
How to maintain the mower's wheels?
Regular Wheel Cleaning Clean the underside wheels regularly to prevent mud and weeds from entangling, which can affect the wheel's movement and performance. Please refer to “How to clean the Yarbo lawn mower?”. Routine Inspections Check for any ...
How to properly store the mower during off-seasons or periods of non-use?
Turn off your Yarbo: Before detach the mower module, please turn off your Yarbo to ensure safety, as well as to protect the machine. Detach and Clean the Mower Module: Detach the lawn mower from the universal body, thoroughly cleaning the underside ...
How to clean the Yarbo lawn mower?
Cleaning Lawn Mower Module Detach the lawn mower from the universal body. Raise the lawn mower from the side and place the lawn mower on Module Vertical Stand, please refer to the following picture. Utilize a high-pressure water gun or water hose to ...