Installation and Setup
How to dismantle the Snow Blower Module?
Store your Snow Blower in the garage or a sheltered area to keep your Yarbo safe. Remove the rear cover, press the power button to turn off Yarbo(IMPORTANT!). Remove this cover from Snow Blower module, with Allen Key #1. Screw the connector onto the ...
How to install a new rear cover？
Things you need to prepare ahead Lawn Mower Module Box Content: Steps Loosen all the anti-slip studs on the track with Socket #1 or any electronic tools(not provided). Please ignore this step if there are no anti-slip studs on the track. Install the ...
How to Install the HaLow Module?
Preparation Before you begin, ensure you have all the necessary components and tools: Ethernet Cable RTK Base with HaLow Module Black HaLow Antenna for Rover Black HaLow Antenna for Base Battery Cover with HaLow Module (USB and Type C cable) Yarbo ...
How to properly reinstall the blades after cleaning or maintenance?
Properly reinstalling the blades on your lawn mower after cleaning or maintenance is crucial for safe and efficient operation. Follow these steps and refer to the provided video link for detailed guidance. Safety Reminders Always use the specified ...
How to reset base?
Sometimes, you may need to reset the Yarbo base. This guide will walk you through the steps to safely reset the base and set up your Yarbo device again. Access Yarbo Settings and Select “Reset Base” Open the Yarbo app. Go to the “Yarbo Settings” ...
How to Install the Tow Hitch on 2023 Yarbo Lawn Mower?
Tools Required Allen Key *4 Steps Remove the Rear Cover Bolts Locate the New Rear Cover on your lawn mower. Using an Allen Key #4, unscrew the two bolts securing the New Rear Cover. Keep these bolts aside for later use. Position the Tow Hitch Find ...