Operation
[2024] Replace Data Center quick guide
Follow these simple steps to replace your Yarbo Data Center efficiently: In Yarbo Settings, click Replace Data Center.Notice:Your map data will be erased when you perform this action. Install Data Center according to the instructions in the User ...
[2024] How to Add and Manage a Docking Station in the Yarbo App
Additional Notes: You can add multiple Docking Stations and Start Points within the Yarbo App. However, during an active Work Plan, only one Docking Station or Start Point can be selected at a time. Each Docking Station must be assigned to a specific ...
[2024] How to Remove Skid Shoes
Always turn off and disconnect your Yarbo before attempting any removal or maintenance task. Using Skid Shoes is an essential step to enhancing the Snow Blower Module's performance on uneven surfaces. It makes it possible for the snow blower to move ...
[2024] How does Yarbo deal with wet snow?
The plow blade is designed for handling wet snow, which tends to be heavier and more challenging to clear. Wet snow typically forms when the temperature rises to around -5°C, causing some snow to melt and become sticky. Using the Plow Blade: After ...
[2024] How to Remove the Snow Blower Protection Fence
The protection fence on your Yarbo snow blower module plays an important role in keeping components safe during transport and basic operations. However, there may be instances where you need to remove it, such as for maintenance or to install the ...
[2024] How to Replace Track Side Plate
Purpose of the Track Side Plate The Track Side Plate is an important component designed to prevent snow from accumulating inside the tracks and reaching the motors, which could lead to operational malfunctions during snow removal. Your Yarbo Core ...
[2024] How to Activate/Deactivate the Auger When Starting a Workplan
The Auger is a key component in your Yarbo's snow removal system, and being able to easily activate or deactivate it ensures that your Yarbo can adapt to different working conditions. This guide will walk you through how to adjust the auger settings ...
[2024] How to recharge Yarbo
Four ways to recharge Yarbo 1. Using the Physical Controller: Drive Yarbo back to the docking station with the physical controller. After approximately 3 minutes, Yarbo will announce "ready to charge" and "start charging," and will then begin ...
[2024] How to Select the Snow Throwing Direction
1. When Can We Set and Select the Snow Throwing Direction? After setting up the Data Center and Docking Station according to the app instructions, you should first draw a Pathway from the Docking Station (serving as the origin) to the Working Area. ...
[2024] How to Operate the Auger Safely?
The Yarbo Snow Blower is designed to efficiently clear snow from surfaces, but handling the auger safely is essential to prevent injury or equipment damage. This guide provides important safety considerations to ensure the safe operation of the Yarbo ...
[2024] Yarbo Physical Controller Instructions
Connecting physical controller to Yarbo Connecting physical controller to mobile phone Yarbo Controller Holder Installation Guide Yarbo Physical Controller Instructions This guide provides detailed instructions on using the Yarbo physical controller ...